Emerald Tassle Earrings

Set your stones bending one loop on each end flat to be used as connector loops.
Make twelve strands of nine 4mm emerald beads with a gold bead at the bottom. You will string 9 4mm beads then one gold bead and go back through the nine 4mm beads.
Tie the six strand of beads together and repeat.
Wrap the loop of the eye pin around the know of the six strand tassle. You can make a loop with a head pin and do the same thing. Make sure the loop is clamped tight on the tassle knot. repeat
Run the head pin or eye pin through the bottom of the bead cap and make a loop at the top of the beads cap. repeat
Attach the loop to one end of the stone setting. repeat
Open the loop on the ear wire and run the other loop of the stone setting through it. Repeat